J9 Peugeot Minibüsleri:

Şöför ayırma duvarı - ( 1mm x 380mm x 1850mm )

Direksiyon kolon desteği - ( 2.5mm x 660mm x 350mm )

Sol ve sağ şase lonjeronu - ( 1.5mm x 140 mm x 2880 mm )

Yay traversi - ( 4mm x 240mm x 1080mm )

Skoda 1203 Pikap:

Sol-sağ çamurluklar - ( 1mm x 850mm x 1200mm )

kaput paneli, kapı iç-dış panelleri, kalorifer kutusu, ön cam çerçevesi, pancur çerçevesi, çamurluk iç panelleri vs. - ( hepsi 1mm saçtan basılmış muhtelif ölçülerde )

Mercedes-Benz Unimog Kamyonu:

Şöför mahalli arka duvarı üst parça - ( 1mm x 700mm x 1800mm )

Şöför mahalli arka duvarı alt parça - ( 1mm x 710mm x 1900mm )

Kapı yan direkleri sağ/sol - ( 1.5mm x 900mm x 300mm )

Mitsubishi Maraton,Prenses,Safir Otobüsleri ve Bazı Minibüsler:

Ön ve arka kapılar ( komple ) - ( 1mm x 990mm x 2360mm)

Ön ve arka kapılar ( komple ) - ( 1mm x 1035mm x 2385mm )

Ön göğüs dış ve iç paneller - ( 1mm x 750mm x 2500mm )

Arka cam üst takviye iç paneli - ( 1mm x 400mm x 2350mm )

Yan direk - ( 1mm x 300mm x 3150mm )

Çeşitli ebadlarda diğer saç parçalar

* Şu an üretimine devam edilen parçalar ve bunların ait olduğu modeller yukarıda belirtilmemiştir.

Some parts that we produced before ;

J9 Peugeot Minibuses:

Seperation panel of driver cabinet - ( 1mm x 380mm x 1850mm )

Steering shaft support - ( 2.5mm x 660mm x 350mm )

Left and right longeron of the frame - ( 1.5mm x 140 mm x 2880 mm )

Spring traverse - ( 4mm x 240mm x 1080mm )

Škoda 1203 Pickup Truck:

Left-right fender - ( 1mm x 850mm x 1200mm )

hood panel, inner and outer panels of the door, heating box, windscreen frame, car grille frame, fender inner panels etc. - ( all are produced from 1mm thick steel at various sizes)

Mercedes-Benz Unimog Truck:

The upper part of rear wall of cabs - ( 1mm x 700mm x 1800mm )

The lower part of cabs - ( 1mm x 710mm x 1900mm )

Door side poles right/left - ( 1.5mm x 900mm x 300mm )

Mitsubishi Maraton,Prenses,Safir Buses and Other Minibus Models:

Front and rear doors ( complete ) - ( 1mm x 990mm x 2360mm)

Front and rear doors ( complete ) - ( 1mm x 1035mm x 2385mm )

Inner and outer panels of front chest of the chassis- ( 1mm x 750mm x 2500mm )

The inner panel of top reinforced of the rear window - ( 1mm x 400mm x 2350mm )

Side pole - ( 1mm x 300mm x 3150mm )

Steel parts at various sizes

* The above list doesn't contain the models and their parts which are still producing